Digi Ports

The current wiring of the cluster’s serial server is thus. For port N, it’s labeled N+1 on the device and is /dev/tty_dgrp_cl_N on Magellan or any other machine configured with the digi daemon (and the right line in /etc/dgrp.backing.store)

Kermit Invocation

  • -l /dev/tty_dgrp_cl_0 extdell console
  • -l /dev/tty_dgrp_cl_1 conch
  • -l /dev/tty_dgrp_cl_2
  • -l /dev/tty_dgrp_cl_3
  • -l /dev/tty_dgrp_cl_4
  • -l /dev/tty_dgrp_cl_5
  • -l /dev/tty_dgrp_cl_6
  • -l /dev/tty_dgrp_cl_7 sunfire1-bmc
  • -l /dev/tty_dgrp_cl_8 <unoccupied; test for correct behavior>
  • -l /dev/tty_dgrp_cl_9 sunfire0-bmc
  • -l /dev/tty_dgrp_cl_10 serrao com0
  • -l /dev/tty_dgrp_cl_11
  • -l /dev/tty_dgrp_cl_12
  • -l /dev/tty_dgrp_cl_13 magellan com0
  • -l /dev/tty_dgrp_cl_14
  • -l /dev/tty_dgrp_cl_15 -b 2400 -C "set flow-control none,set carrier-watch off,c" left rack APC unit
  • -l /dev/tty_dgrp_cl_16
  • -l /dev/tty_dgrp_cl_17
  • -l /dev/tty_dgrp_cl_18
  • -l /dev/tty_dgrp_cl_19
  • -l /dev/tty_dgrp_cl_20
  • -l /dev/tty_dgrp_cl_21
  • -l /dev/tty_dgrp_cl_22
  • -l /dev/tty_dgrp_cl_23
  • -l /dev/tty_dgrp_cl_24 sunfire3-bmc
  • -l /dev/tty_dgrp_cl_25 sunfire2-bmc
  • -l /dev/tty_dgrp_cl_26 schachtel com0
  • -l /dev/tty_dgrp_cl_27
  • -l /dev/tty_dgrp_cl_28 gomes com0
  • -l /dev/tty_dgrp_cl_29 barbosa com0
  • -l /dev/tty_dgrp_cl_30 mgmt-cisco console
  • -l /dev/tty_dgrp_cl_31 -b 2400 -C "set flow-control none,set carrier-watch off,c" right rack APC unit

Table Of Contents

Previous topic

Digi EtherLite

Next topic

APC MasterSwitch Controllers

This Page